FLOORING APPLICATION PROCESS
Call: 732-409-7707
FLOORING APPLICATION PROCESS
Utilizing the most advanced floor coating Installation Technology and highly experienced installers, we consistently deliver a high quality, stain-resistant,
easy to clean surface that will remain looking like new for many years to come.
EncoreGarage can complete your floor coating project in as little as 2-3* days. Our 5 steps outlines the garage floor coating application, installation process.
Step 1 – DIAMOND GRIND THE SURFACE
Preparation of the concrete prior to applying the base coat layer is critical and essential to the durability and longevity of the epoxy floor coating system. EncoreGarage™ uses mechanical grinders with “diamond studded tooling” for surface preparation – which is far superior to the acid wash method used by others in the industry. We attach HEPA filtered vacuums to our grinders so that the dust and any contaminants are radically reduced. Diamond grinding scours the surface of the concrete to open up the pores as well as eliminate surface contaminants. This installation technique allows the base coat to penetrate deep into the pores of the concrete, creating a superior bond.
Step 2 – REPAIR OF CRACKS, CHIPS & PITTING
Our prep work also includes filling in cracks, patching and fixing any areas that need addressed. Once the filler has cured, the excess is ground down so that the floor is completely smooth and any cracks, chips and pitting are invisible. Floors that require extensive repair work may require up to 24 hours to cure.
Step 3 – HIGH PERFORMANCE EPOXY BASE COAT
The installation process starts by applying a thick layer of 100% solid deep penetrating epoxy. This epoxy is designed to absorb deep into the pores of the concrete surface. It’s slow curing and deep penetrating chemical design promotes much deeper penetration into the concrete pours than any other epoxy or fast curing polyaspartic thereby creating a superior adhesion. This bond is imperative to a durable, long lasting floor system.
Step 4 – DECORATIVE FLEXCORE™ FLAKES
The decorative polymer chips are then broadcasted into the wet epoxy and chemically bond together—which ultimately gives the coating the look of Granite or Terrazzo. The flakes also add body to the epoxy, increasing the overall strength of the system as well as create a texture which increases the overall slip resistance of the system. In order to achieve 100% coverage, we will apply an additional 20-30% more flakes. The following day, we remove the excess flake material using a flat metal edge tool to knock down any standing flakes. Then the entire floor is blown and vacuumed to remove any excess debris. Now the floor is even and smooth, which makes it ready for the final step of the garage floor coating process.
Step 5 – DURABLE POLYASPARTIC TOP COAT
The last step of the process is the application of a high quality, UV stable, scratch, chemical and stain resistant polyaspartic top coat. The top coat is applied by a squeegee and then back rolled. This process ensures that the top coat has a thick and even layer, which leaves a consistent finish that’s extremely durable. The top coat requires 24 hours to cure for foot traffic and 48 hours for vehicles. Once completed, you will have an attractive, high quality and extremely durable floor that reflects the beauty of your home’s interior.
**Floors that require extensive repair work may require up to 24 hours to cure, therefore installation make take 3 days.
FREE CONSULTATION
We always provide a FREE consultation and written estimate.
ESTABLISHED IN NEW JERSEY
We are locally owned and operated and founded in the New Jersey area back in 2004.
TRUE INDUSTRY EXPERTS
Extensive knowledge combined with in-house resources to provide more.
COMPLIMENTARY ON-SITE CONSULTATION
Let's talk about your garage makeover
